Foam Wall Berms
Drive-Over Secondary Containment: Foam Wall Spill Berms
Foam Wall Spill Berms are a low-profile spill containment liner built to accommodate equipment and vehicles on a job site. With robust, drive over walls, these berms allow items to be immediately moved into a containment area during use, fuel transfer, cleaning, draining, or other activities where there is a high potential for leaks or spills. Berms can also be used for stationary equipment such as dumpsters, tanks, and machinery.
Foam Wall Berm Technical Specifications
22 oz. or 30 oz. PVC Urethane XR-5 or Elvaloy
|6 ft. (1.8)||6 ft. (1.8)||4" (0.10 m)||90 gal. (341 L)|
|10ft (3 m)||10 ft. (3 m)||4" (0.10 m)||247 gal. (935 L)|
|10ft (3 m)||20 ft. (6 m)||4" (0.10 m)||494 gal. (1,870 L)|
|10 ft. (3 m)||40 ft. (12.2 m)||4" (0.10 m)||997 gal. (3,774 L)|
|10 ft. (3 m)||50' (15.24 m)||4" (0.10 m)||1,247 gal. (4,720 L)|
|15 ft. (4.6 m)||20 ft. (6 m)||4" (0.10 m)||748 gal. (2,831 L)|
|15 ft. (4.6 m)||60 ft. (18.3 m)||4" (0.10 m)||2,244 gal. (8,494 L)|
Additional sizes, fabrics, and wall heights are also available so please do not hesitate to ask!
Foam Wall Berm Construction
- Fabric: LLDPE, PVC (22 oz. or 30 oz.), Urethane, Elvaloy
- Sizes: Typical Sizing Above (Site specific sizing available for all berms)
- Side Walls: Foam Walls
- Flyer (pdf)
- Installation (pdf)
Foam Spill Berm Information
Similar to other containment berms, foam wall models are built from your choice of either a PVC, Urethane, XR-5 or Elvaloy liner. Each fabric is chosen based on the type of liquid being stored on the berm, length of storage and outside conditions. If you are not sure which liner will be best for your location, please do not hesitate to contact us at 772-646-0597.
Due to the low profile nature of foam wall models, these berms are often used in combination with several spill accessories including tread guards (shown in yellow above) and ground pads. These accessories work to provide an extra layer of strength on top and below the berm to help protect against abrasion and heat. All tread guards are designed as removable fabric, allowing them to be placed at widths that match the widths of your tires.
Foam Berm Applications:
Low profile berms provide some of the easiest storage options available for moving equipment, tanks or trucks. Their easy access points have allowed them to be successfully implemented in a range of locations, including use in the following applications:
Product Flyer Instructions
- Containment for Tanks, Trucks, & Military Vehicles
- Containment for Items in Military Operations
- Homeland Security Containment
- Spill Response Situations
- Fast Reaction to Spills & Leaks
- Fuel Tankers and Truck Containment
For more information on these foam wall berms, please check out the following pages:
Providing customers with a range of containment options, Portable Tanks, a division of GEI Works offers several additional berm models including drive through berms and aluminum angle berms. Both of these options provide an extended wall height of one foot (1 ft.) to increase the containment capacity inside the unit. Information on both of these models can be found on the links below:
Other products frequently used for secondary containment include a wide range of products to contain tanks, vehicles, and machinery. All of our products, including our variety of berms, can be seen on the Secondary Containment Product Page.
How Can Containment Products Help your Site?
The foam wall berms are frequently used to help keep sites in compliance with local and federal EPA and spill containment regulations. Having a containment berm on site can provide sites with the following benefits:
- On Site Spill Containment
- Portable Spill Control from Tank to Tank
- Easy Access on and off the Berm
- Prevents Sites from Getting Fined
- Keeps Hazardous Materials from Contaminating the Site
For further information on secondary containment regulations and specifications, please review the EPA Secondary Containment Regulations.